Garner Garner PD-5E Table Top Hard Drive Destroyer (VARSSDPD5)
Leasing Illustration - Example Only
This model could be available for £79.78 per week
Specifications
- Portable device uses force to physically bend, break, mangle and crush hard disks
- Suitable for All Media up to 113 mm wide by 165 mm deep by 50 mm high. The PD-5 can crush multiple drives at a time including two 1” drives or as many as 8 laptop drives.
- Up to 600 per hour (1 inch drives) and up to 2400 per hour (laptop drives)
- Suitable for Lower Level Physical Damage of Media
- Dimensions (WxDxH): 175x400x375mm
Jump to: Full Product Info
PDF Data Sheet
Product Details
The Garner PD-5E Hard Drive Destroyer is incredibly easy to use, simply open the door, insert a hard drive close the door and push the button. The PD-5’s high strength stainless steel wedge bends, breaks, mangles and crushes the media with 10+ tons of downward pressure meeting NSA/CSS SDDM 9-12 requirements as well as DoD Emergency Destruction Guidelines. The PD-5E features an Automated Crush Depth Function controlled by internal logic that both senses the height of the hard drive media in the chamber and calibrates the most effective crush depth without sensors in the crush bay. The Door Open Safety Sensor stops the PD-5E immediately if the door is opened during the destruction cycle.
Built to the highest standards in the industry, the PD-5E’s stainless steel crushing wedge resists chips and dents. The PD-5E has been real world tested to meet the demands of data centers as well as recyclers. The PD-5E does not use hydraulics to crush so there is no need for an extra “Emergency Stop” switch or oil spill containment mat. The PD-5E also has maintenance reminders utilizing the 32 character LCD display.
Rather than taking media to the destroyer, bring the light weight PD-5E right to the media. The PD-5E has a footprint no larger than most desktop computers and ships safely in the optional MIL-SPEC shipping case.
The PD-5E also features a session counter, an overall cycle counter, a door open safety sensor, a shatter-proof transparent door, no hydraulics and no adapters are required. It can operate from 32 degrees F (0 degrees C) to 122 degrees F (50 degrees C) and Relative Humidity: 5% to 45%.
| Specifications | |
| Name | Garner PD-5E Table Top Hard Drive Destroyer |
| Manufacturer Code | VARSSDPD5 |
| Security | |
| DIN 66399 Security Levels | O-0 / T-0 / E-0 / F-0 / H-3 |
| Security Level: | Suitable for Lower Level Physical Damage of Media |
| Security Approvals | Meets NSA/CSS SDDM 9-12 requirements as well as DoD Emergency Destruction Guidelines |
| Capacities | |
| Sheet Capacity All specifications stated are to be used as guidance only and are subject to change at any time. Shredder sheet capacities for example are provided by manufacturers and are based on 70 gram paper, and are normally only achievable in ideal situations, so heavier duty paper will shred less sheets. In many cases the capacities quoted are theoretical as conditions vary and are dependent on operator usage, age and condition of machines, how regularly cutters are oiled, type and quality of paper etc. so realistic throughputs can be as low as half that of the theoretical capacities quoted. | 0 sheets |
| Normal Throat Capacity All specifications stated are to be used as guidance only and are subject to change at any time. Shredder sheet capacities for example are provided by manufacturers and are based on 70 gram paper, and are normally only achievable in ideal situations, so heavier duty paper will shred less sheets. In many cases the capacities quoted are theoretical as conditions vary and are dependent on operator usage, age and condition of machines, how regularly cutters are oiled, type and quality of paper etc. so realistic throughputs can be as low as half that of the theoretical capacities quoted. | 0 sheets per pass |
| Daily Capacity | 0 sheets |
| CD/DVD Capacity | 0 |
| Hourly Media Capacity | 0 CDs/DVDs per hour |
| Daily Media Capacity | 0 CDs/DVDs per day |
| Hourly Capacity | Up to 600 per hour (1 inch drives) and up to 2400 per hour (laptop drives) |
| Specifications | |
| Technology | Portable device uses force to physically bend, break, mangle and crush hard disks |
| Operation | Automatic Operation |
| Suitable For | All Media up to 113 mm wide by 165 mm deep by 50 mm high. The PD-5 can crush multiple drives at a time including two 1” drives or as many as 8 laptop drives. |
| Technical | |
| Noise Level Can be subject to many factors but is an indication when a machine is run without paper being shredded. | 0 dB |
| Cycle Time | 8-10 seconds |
| Duty Cycle | Continuous |
| Continuous Run Time The Continuous Run Time of all shredders are to be used as guidance only and are normally only achievable in ideal situations. Run times can be dependent on operator usage, the age and condition of machines, how regularly cutters are oiled, the type and quality of paper used etc. | 0 mins |
| Motor Cool Down Time Please note that the details supplied are for indication only and may change slightly due to manufacturers processes or improvements. If the precise figures is critical for your specific use case, we recommend contacting our customer support team for more detailed information. | 0 mins |
| Voltage Cycle (v/Hz) Please note that the details supplied are for indication only and may change slightly due to manufacturers processes or improvements. If the precise figures is critical for your specific use case, we recommend contacting our customer support team for more detailed information. | 230-240v 50Hz |
| Other Voltages | 110-120 volts 60Hz |
| General | |
| Dimensions (WxDxH) Please note that the product dimensions provided on this website refer to the main product size and may vary slightly due to manufacturing processes. The measurements represent the core dimensions of the product and do not include any extensions or attachments, such as electrical plugs, cables, or other accessories unless explicitly stated. | 175x400x375mm |
| Weight Please be aware that the product weights provided on this website are approximate and are intended to give you a general idea of the item's weight. The stated weight represents the primary product without including any additional accessories, attachments, or packaging, unless explicitly mentioned. | 29.5kg |
| Warranty | |
| Machine Warranty Goods are generally covered by the standard manufacturer's warranty which is available on request. Goods must have been purchased from new by its first user, and a dated receipt, email confirmation or invoice must be provided as proof of purchase. If goods are replaced during the warranty period only the unexpired term of the original warranty is valid and transferred to the replacement product. | 1 year |
| Downloads | |
| Buyers Guide | Download Here
 |
Specifications subject to change - See Terms & Conditions for more info
Information
* UK Registered Only
