Intimus Intimus 360 Destroyer (348701)
£16,806 + vat (£20,167 inc vat)
Leasing Illustration - Example Only
This model could be available for £87.97 per week
Specifications
- 0 sheets per pass / 0 sheets per day
- Up to 1800 per hour (2.5 inch drives) and up to 360 per hour (3.5 inch drives)
- Suitable for Lower Level Physical Damage of Media
- Dimensions (WxDxH): 191x72x378mm
Jump to: Full Product Info
PDF Data Sheet
Product Details
The high-speed, high-powered Intimus 360 Destroyer is the fastest and lightest NSA/CSS EPL-listed hard drive destroyer on the market.
The 360 Destroyer bends, breaks and mangles hard drives including data platters and other internal components preventing data recovery.
The Intimus 360 Destroyer meets evolving technology challenges by increasing the speed, amplifying the crushing power and offering a solid-state destroyer that both perforates and waffles solid-state media, flash drives, USB thumb drives, and SSHD controller boards. HDDs are bent by the Intimus 360 Destroyer. It is best to combine the Destroyer with a Degausser for a full solution for high security requirements.
Security level H3 for standalone application.
•DOD Emergency Destruction Guidelines
•FCC
•GLBA (Gramm-Leach-Bliley Act)
•HIPAA (Health Information Portability and Accountability Act)
•NIST (National Institute of Standards and Technology) Guidelines for Media Sanitization
•NIST SP 800-36
•NIST SP 800-88r1
•NSA/CSS SDDM 9-12
•PCI DSS 3.2 (Payment Card Industry Data Security Standard)
•PIPEDA (Personal Information Protection and Electronic Documents Act)
| Specifications | |
| Name | Intimus 360 Destroyer |
| Manufacturer Code | 348701 |
| Security | |
| DIN 66399 Security Levels | O-0 / T-0 / E-0 / F-0 / H-3 |
| Security Level: | Suitable for Lower Level Physical Damage of Media |
| Capacities | |
| Sheet Capacity All specifications stated are to be used as guidance only and are subject to change at any time. Shredder sheet capacities for example are provided by manufacturers and are based on 70 gram paper, and are normally only achievable in ideal situations, so heavier duty paper will shred less sheets. In many cases the capacities quoted are theoretical as conditions vary and are dependent on operator usage, age and condition of machines, how regularly cutters are oiled, type and quality of paper etc. so realistic throughputs can be as low as half that of the theoretical capacities quoted. | 0 sheets |
| Normal Throat Capacity All specifications stated are to be used as guidance only and are subject to change at any time. Shredder sheet capacities for example are provided by manufacturers and are based on 70 gram paper, and are normally only achievable in ideal situations, so heavier duty paper will shred less sheets. In many cases the capacities quoted are theoretical as conditions vary and are dependent on operator usage, age and condition of machines, how regularly cutters are oiled, type and quality of paper etc. so realistic throughputs can be as low as half that of the theoretical capacities quoted. | 0 sheets per pass |
| Daily Capacity | 0 sheets |
| CD/DVD Capacity | 0 |
| Hourly Media Capacity | 0 CDs/DVDs per hour |
| Daily Media Capacity | 0 CDs/DVDs per day |
| Hourly Capacity | Up to 1800 per hour (2.5 inch drives) and up to 360 per hour (3.5 inch drives) |
| Specifications | |
| Shreds Paper | No |
| Shreds Staples Staples refer to standard 26/6 sized staples - never shred these through an automatic paper feeder - use the manual feed slot instead | No |
| Shreds Paperclips Paperclips refer to standard sized paperclips - never shred these through an automatic paper feeder - use the manual feed slot instead | No |
| Shreds CDs/DVDs/Blu-Ray | No |
| Shreds Credit Cards | No |
| Shreds Floppy Disks | No |
| Shreds Cardboard Boxes | No |
| Technical | |
| Noise Level Can be subject to many factors but is an indication when a machine is run without paper being shredded. | 0 dB |
| Continuous Run Time The Continuous Run Time of all shredders are to be used as guidance only and are normally only achievable in ideal situations. Run times can be dependent on operator usage, the age and condition of machines, how regularly cutters are oiled, the type and quality of paper used etc. | 0 mins |
| Motor Cool Down Time Please note that the details supplied are for indication only and may change slightly due to manufacturers processes or improvements. If the precise figures is critical for your specific use case, we recommend contacting our customer support team for more detailed information. | 0 mins |
| Voltage Cycle (v/Hz) Please note that the details supplied are for indication only and may change slightly due to manufacturers processes or improvements. If the precise figures is critical for your specific use case, we recommend contacting our customer support team for more detailed information. | 230-240v 50Hz |
| General | |
| Dimensions (WxDxH) Please note that the product dimensions provided on this website refer to the main product size and may vary slightly due to manufacturing processes. The measurements represent the core dimensions of the product and do not include any extensions or attachments, such as electrical plugs, cables, or other accessories unless explicitly stated. | 191x72x378mm |
| Weight Please be aware that the product weights provided on this website are approximate and are intended to give you a general idea of the item's weight. The stated weight represents the primary product without including any additional accessories, attachments, or packaging, unless explicitly mentioned. | 35.8kg |
| Warranty | |
| Machine Warranty Goods are generally covered by the standard manufacturer's warranty which is available on request. Goods must have been purchased from new by its first user, and a dated receipt, email confirmation or invoice must be provided as proof of purchase. If goods are replaced during the warranty period only the unexpired term of the original warranty is valid and transferred to the replacement product. | 1 year |
| Downloads | |
| Buyers Guide | Download Here
 |
Specifications subject to change - See Terms & Conditions for more info
Information
* UK Registered Only
